Latest E tender jammu and kashmir.

1

TSID: 17512345 construction of gabbin wall (crates) and edge wall in km 3rd rd (650-750) on sarolbagh to atalgarh link road- civil works.

Jammu and Kashmir

3.95 Lac

13 Jul 2020

2

TSID: 17512327 construction of walling around fruit and vegitable market at bataingo anantnag (balance work- civil works.

Jammu and Kashmir

15.30 Lac

17 Jul 2020

3

TSID: 17512288 annual rate contract for the supply, installation, testing and commissioning of various line materials as well as distribution substations under the jurisdiction of sub-division chadoora of electric division budgam.- electrical works.

Jammu and Kashmir

30.00 Lac

16 Jul 2020

4

TSID: 17512247 auction sale of lot no: 91.0 lot name: off line fault locator simulator

Jammu and Kashmir

Refer Doc.

17 Jul 2020

5

TSID: 17512241 construction of protection work, renovation of quarter and toliet at division nowshera under water supply scheme rajal hanjana nrdwp- civil works.

Jammu and Kashmir

2.09 Lac

15 Jul 2020

6

TSID: 17512237 auction sale of lot no: 45.0 lot name: 400 kv ctâ â

Jammu and Kashmir

Refer Doc.

17 Jul 2020

7

TSID: 17512220 auction sale of lot no: 117.0 lot name: emergency lights flouricent type

Jammu and Kashmir

Refer Doc.

17 Jul 2020

8

TSID: 17512166 construction of tile path from house of haji gh ahmad mir upto house of ab aziz mir at syed abad ward no. 08- civil works.

Jammu and Kashmir

99.00 Thousand

13 Jul 2020

9

TSID: 17512108 auction sale of lot no: 66.0 lot name: insulation tester 5kv

Jammu and Kashmir

Refer Doc.

17 Jul 2020

10

TSID: 17512090 please refer to boq- civil construction goods.

Jammu and Kashmir

32.48 Lac

10 Jul 2020

11

TSID: 17512074 upgradation of road at hajin shahgund gundjahangir road (from hajin bridge) by way of providing and laying of of wet mix in patches/stretches, 50mm thick compacted bituminous macadam and 25mm thick compacted semidence finished with 6mm thick seal coat. machine mix laid- civil works.

Jammu and Kashmir

70.00 Lac

09 Jul 2020

12

TSID: 17512018 auction sale of lot no: 77.0 lot name: oil cell heater for wti calibration

Jammu and Kashmir

Refer Doc.

17 Jul 2020

13

TSID: 17511987 auction sale of lot no: 130.0 lot name: plcc power card

Jammu and Kashmir

Refer Doc.

17 Jul 2020

14

TSID: 17511940 providing and laying wet mix macadam, 50mm thick bituminous macadam and 25mm thick semidense with 6mm thick seal coat to uranhall pazalpora road km 1st/kanjigund link (part)- civil works.

Jammu and Kashmir

58.00 Lac

10 Jul 2020

15

TSID: 17511768 providing and laying wet mix macadam, 50mm thick bitumen macadam, 25mm thick sdbc in stretches on road from shant nagar, patoli rotary to janipur road, khajuria mohalla and allied link.- civil works.

Jammu and Kashmir

62.75 Lac

07 Jul 2020

16

TSID: 17511761 repair renovation of community hall at kani kadal srinagar- civil works.

Jammu and Kashmir

Refer Doc.

13 Jul 2020

17

TSID: 17511743 auction sale of lot no: 175.0 lot name: scrap porcelain 120kn disc insulator

Jammu and Kashmir

Refer Doc.

17 Jul 2020

18

TSID: 17511658 laying and fitting of g.i pipe gravity main and distribution system for mohra harwari , chadoos , gayemarg under wss neel bhordhar (nabard)

Jammu and Kashmir

32.65 Lac

14 Jul 2020

19

TSID: 17511647 auction sale of battery 12 v 7 plate etc.

Jammu and Kashmir

Refer Doc.

17 Jul 2020

20

TSID: 17511593 auction sale of vehicle : crowbar of sorts etc.

Jammu and Kashmir

Refer Doc.

17 Jul 2020

21

TSID: 17511591 slip clearance from rd 11630- rd 11760 of sumbal link channel ushp-ii kangan- civil works.

Jammu and Kashmir

4.19 Lac

09 Jul 2020

22

TSID: 17511545 auction sale of lot no: 65.0 lot name: variable heavy duty dc source for relay testing

Jammu and Kashmir

Refer Doc.

17 Jul 2020

23

TSID: 17511508 auction sale of lot no: 46.0 lot name: 400 kv ct

Jammu and Kashmir

Refer Doc.

17 Jul 2020

24

TSID: 17511488 annual rate contract for the supply, installation, testing and commissioning of various line materials as well as distribution substations under the jurisdiction of sub-division beerwah of electric division budgam.- electrical works.

Jammu and Kashmir

30.00 Lac

16 Jul 2020

25

TSID: 17511485 construction of bathing ghat/allied work near datti mandir at village kullian kamala pyt dabuj shehzada block vijaypur district samba- civil works.

Jammu and Kashmir

5.00 Lac

09 Jul 2020

26

TSID: 17511477 special repair to bldg no p 2 88 at mh under ge satwari - corrigendum.

Jammu and Kashmir

32.18 Lac

18 Jul 2020

27

TSID: 17511465 supply n delivery of elect spares n minor store/hardware items from the original equipment manufacturers, their auth dealers /local representatives or local ssi unit holders or reg firms/reg self-help groups /suppliers already in the trade - corrigendum. -1 al. alloy as per is: 617 of 1975 pg clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra conductor (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided). 2 al. alloy as per is: 617 of 1975 t-clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra conductor (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided). 3 al. alloy as per is: 617 of 1975, bi-mettalic ct clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for panther conductor with ct terminals suitable for 132kv/33kv cts of makes/ae mumbai, sct gaziabad, bhel, vidhyut control system andhra, mehru bhiwadi/ laxshmi engg bhopal, jyoti etc. (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 4 al. alloy as per is: 617 of 1975, bi-mettalic isolator pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) of zebra conductor with pad terminals suitable for 132kv /33kv isolators of east land, elpro, hivelm calcutta, sands,gr power, skipper, bimco,andhra mech. industries etc (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 5 al. alloy as per is: 617 of 1975, bi-mettalic breaker pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) . of zebra conductor with pad terminals suitable for 132kv /33kv breakers of sf 6 type-abb,cgl, siemens, bhel/vcb type- sands, gec alsthom, bhel, abb, siemens, megawin etc. (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 6 al. alloy as per is: 617 of 1975, bi-mettalic ct pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin acsr zebra conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv cts of ae mumbai, sct gazaibad, bhel, vidhyut control andhra, mehru bhiwadi/ laxmi engg bhopal vidhyut control andhra, jyoti etc (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 7 al. alloy as per is: 617 of 1975, bi-mettalic twin isolator pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin acsr zebra conductor with conductor spacing 300mm and isolator pad clamp terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv isolator of east land, elpro, hivelm calcutta, sands,gr power, skipper, bimco. (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 8 al. alloy as per is: 617 of 1975, bi-mettalic breaker pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin acsr zebra conductor with conductor spacing 300mm breaker terminal spacing 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132kv /33kv breaker type sf6-cgl, abb, siemens, bhelvcb-sands, gec alstom, bhel, abb siemens megawin (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 9 al. alloy as per is: 617 of 1975 pg clamps conforming to is: 5561-1970 (ammended upto date) for acsr panther conductor having bolts hot galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of panther conductor (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 10 al. alloy as per is: 617 of 1975 t- clamps conforming to is: 5561-1970 (ammended upto date) for acsr panther conductor having bolts hot galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of panther conductor likely makes: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided 11 al. alloy as per is: 617 of 1975, bimetallic ct pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and ct terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv /33kv cts of ae mumbai, sct gaziabad, bhel, vidhyut control system andhra, lakshmi bhopal, mehru bhiwadi, jyotilikely makes: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided 12 al. alloy as per is: 617 of 1975, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv /33kv isolator of estland, elpr, hivelm calcutta, sands, gr power, skipper, bimco, andhra mech. ind, (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 13 al. alloy as per is: 617 of 1975, bimetallic breaker pad clamp (universal take off) conforming to is: 5561-1970 (ammended upto date) for twin panther conductor with conductor spacing 300mm and terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv/33kv breaker of sf6- cgl, abb, siemns bhel vcb-sands, gec alstom, bhel, abb siemens, megawin ,likely makes: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided 14 al. alloy as per is: 617 of 1975 pg clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra-acsr panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 15 al. alloy as per is: 617 of 1975 t-clamps 3 bolt type conforming to is: 5561-1970 (amended upto date) for acsr zebra-acsr panther conductor having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of zebra conductor. (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 16 single suspension hardware fitting for (132/33kv yard) for zebra conductor conforming to is 2486 (part-i) ammended upto date and having suspension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 16mm bands 70kn disc insulators., ultimate tensile strength of (h/w) 7000kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 17 single tension hardware fitting (for 132/33kv yard) for acsr zebra conductor conforming to is 2486 (part-i) ammended upto date) and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kg uts/slip strength of clamp = 95% of uts of conductor = 8550 kg(make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 18 double suspension hardware fitting for zebra conductor conforming to is 2486 (part-i) ammended upto date) and having suspension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 16mm bands 70kn disc insulators., uts of hardware = 7000kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 19 double tension hardware fitting for zebra conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg likely makes: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided a. station typeb. line type 20 single tension fitting for acsr twin zebra conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 21 single suspension fitting for acsr twin zebra conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 22 single suspension hardware fitting for acsr panther conductor conforming to is 2486 (part-i) amended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts hardware = 9000kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 23 single tension hardware fitting for acsr panther conductor conforming to is 2486 (part-i) amended upto date) and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts hardware = 9000kg uts/slip strength of clamp = 95% of uts of conductor = 8550kg(make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided) 24 single tension fitting for acsr twin panther conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 25 single suspension fitting for acsr twin panther conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 26 compression type repair sleeve suitable for acsr panther conductor of 30/7/3.18mm designation with body and keeper made of aluminum alloy for providing reinforcement of conductor with broken/damaged aluminum strands. repair sleeve should conform to is: 2121/1981 (with latest amendments up to date) and should present a smooth surface after compression min failing load = 95% uts of conductor = 7654kg compression pressure = 100 tons for al electrical resistance at 20oc =75% of measured resistance of equivalent length of conductor corona formation voltage = 110% of max line to ground voltage 29 33 kv current transformer (ct) 1200-800-400/1-1-1 a (make ae/abb/landt) (as specified in technical specifications) 30 132 kv current transformer (ct) 600-300-150/1-1-1-1-1 a (make ae/abb/landt) (as specified in technical specifications) 31 matel halid lamp 400 watt (philips, crompton,bajaj, havells make) 32 mh choke/ballast 400 watt (philips, crompton,bajaj, havells make) 33 igniter 400 watt (philips, crompton,bajaj, havells make) 34 led street light fitting 60/65 watt (philips, crompton,bajaj, havells make) 35 led street light fitting 90/100 watt (philips, crompton,bajaj, havells make) 36 mcb 16 amp ( havells, standard , landt make) 37 mccb 32 amps 2-pole ( havells, standard , landt make) 38 mccb 63 amps 2-pole ( havells, standard , landt make) 39 mcb 32 amp ( havells, standard , landt make) 40 mccb 100 amp 4 pole ( havells, standard landt make) 41 mccb 200 amp 4 pole ( havells, standard landt make) 42 contactor mn30 (landt) 43 contactor mn32 (landt) 44 contactor ml2 (landt) 45 contactor ml3 (landt) 46 push-buttons 3-5 amp 47 3-phase d.o.l starter 48 turn buckle made of drop forged high tensile steel and should be hdg with the following specifications or as per the sample provided by the purchaser.1.working load limit = 4.54 ton2. dia. thread = 1 inch 3. take up = 6 inch4. length closed position (b) = 447 mm5. length open position (c) = 555 mm 6. length closed position (d) = 532 mm7. openinig jaw (e) = 30 mm 8. length inside (f)= 50 mm9. dia. pin(g) = 22 mm 10. thickness jaw eye(h)= 20 mm11. dia. jaw eye(i) = 55 mm 12. weight each= 5.21 kg 49 preformed guy grip for stainless steel guy wire or steel wire shilling of size 12mm with standard seat dimensions and other standard specifications as per the latest standards in vogue. 50 5 h.p. 3-phase dewatering motor with pump ( make:- crompton greaves)or as per the specifications provided by the purchaser. 51 marshalling kiosk with terminal blocks (size 3feetx 3feet x1feet with roof top) conforming to is standards 52 double suspension hardware fitting for panther conductor conforming to is 2486 (part-i) ammended upto date) and having suspension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 16mm bands 70kn disc insulators., uts of hardware = 7000kg (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided)a. station typeb. line type 53 double tension hardware fitting for panther conductor conforming to is 2486 (part-i) ammended upto date and having tension clamp of al alloy grade-a6(is: 617-1975), ferrous parts hot dip galvanized (is: 2633 1986 ) suitable for 20mm bands 120kn disc insulators., uts of hardware = 9000kguts / slip strength of clamp = 95% uts of conductor = 8550 kg likely makes: rul, zi, honeywell, burma, pee, equivalent etc/ as per departmental sample provided a. station typeb. line type 54 static rope 1/2 inch of standard make conforming with all the latest standards in vogue 55 100 amp 4 pole change over switch of hpl, anchor,legrand make 56 cable ferrules a to z and 0 to 9 57 pp rope 1/2" 58 pp rope 3/4" 59 pp rope 1" 60 manila rope 1/2" 61 manila rope 3/4" 62 manila rope 1" 63 chain pully block 3 ton ( zi, pee, honeywell make) 64 chain pully block 5 ton ( zi, pee, honeywell make) 65 pulling/lifting machine 5 ton of standard make 66 pulling/lifting machine 10 ton of standard make 67 earthing discharge rod (132 kv) of standard make 68 earthing discharge rod (33 kv) of standard make 69 hydrallic conductor cutter (bosch) 70 spring charging motors 110v dc suitable for 33 kv vcb's of abb, bhel, siemens, cgl, megawin make or as per the sample provided by the purchaser. 71 spring charging motors 110v dc suitable for 132 kv sf6 breakers of abb, bhel, siemens, cgl make or as per the sample provided by the purchaser. 72 electric ceiling fan 22-inch (make bajaj, usha, orient, havells) 73 digital meters [set of ammeter (0-1200 a), volt meter for 132kv candr panel and voltmeter for 33kv candr panel] 74 cable glands of sizes ( comet, ascon, national, sigma) 75 scissor for branch cutting make falcon/equivalent or as per the sample provided by the purchaser. 76 branch cutting plier make falcon/equivalent or as per the sample provided by the purchaser. 77 brush cutter heavy duty (make: stihl/honda/bosch) or as per the sample provided by the purchaser. 78 aluminium ladder double folding type (30 feet long) of standard make and quality. 79 motorized chain saw 18 inch (petrol run)(make: honda/bosch/stihl) 80 single phase portable welding machine with all accessories ( electra, arm welders) or as per the sample provided by the purchaser. 81 yoke plate for tension fittings or as per the sample provided by the purchaser. 82 crimping tool (taparia, falcon,jahallni) 83 aluminium ladder 8-feet tool type of standard make and quality. 84 extension cord 15 amp. with cord 10 meter 85 shocker type toggle switch for abb breaker (33 kv vcb) 86 mechanical / spring charging system for 33 kv abb vcb 87 knife switch for 33 kv abb vcb 88 crank housing for 33 kv abb vcb 89 microprocessor controlled fully automatic portable oil testing machine (meggar make) 90 microprocessor controlled fully automatic portable oil testing machine (motwane make) 91 digital insulation tester, 1 kv (make : meggar) 92 digital insulation tester, 5kv (make : meggar) 93 shunt tripping coil / closing coil 110v dc, 1a suitable for 33kv vcb of bhel, abb, gec alstom, siemens, mega win, sands make or as per the sample provided by the purchaser. 94 33kv vacuum interrupter suitable for 33kv vcb of bhel, abb, gec alstom, siemens, mega win, sands make 95 sf-6 gas cylinder of 11kg 96 thermal overload relay “siemens make” of 4a max with range 0.8-1amp and 1.5a-1.2a 97 0.1 amps overload relay for transformer cooling fans or as per the sample provided by the purchaser. 98 digital oti 90-250v ac/dc, range 0-150oc make precimeasure 99 digital wti meter make precimeasure 100 hrc fuse 2 amps 101 hrc fuse 4 amps 102 hrc fuse 6 amps 103 hrc fuse 10 amps 104 indicating lamp 110v dc, pin type / screw type 105 110volt dc alarm buzzer suitable for candr panel 106 numerical o/c and e/f relay make : easun reyrolle/arevapoles : 4 nosvolt : 43- 280v dcamp : 1a 107 2 pole heavy duty rotary switch with “off” 5amp make “key cee” equivalent etc for candr panel 108 auxiliary contactor switch for 33kv vcb of different makes bhel, abb, siemens, megawin,. sands, gec alsthom or as per the sample provided by the purchaser. 109 semaphore indicators for isolators and earth switches 110 silicagel crystal size 8- 8 mesh 111 nuts and bolts of sorts hot dip galvanised (16mmx35mm/ 40mm/45mm/50mm / 65mm/70mm/75mm) heavy duty of standard quality or as per sample 112 gi spring washers of sorts heavy duty as per sample 113 old cotton saree/dhoti cloth 114 145 kv, 50 c/s, 2500 amps, 31.5 ka for one second, ac motor operated horizontal double break, outdoor type 3 pole isolators with all accessories,clamps, auxiliaries, marshalling boxes, other essentials, complete in all respects as specified in the technical specification without earthing blades. 115 36 kv, 50 c/s, 2500 amps,25ka for 3 sec, horizontal double break, outdoor type manual operated 3 pole isolators with all accessories, auxiliaries,clamps, marshalling boxes, other essentials, complete in respects as specified in the technical specification without earthing blades 116 36 kv, 50 c/s, 2500 amps,25ka for 3 sec, horizontal double break, outdoor type manual operated 3 pole isolators with all accessories, auxiliaries,clamps, marshalling boxes, other essentials, complete in respects as specified in the technical specification with earthing blade 117 145 kv, 50 c/s, 2500 amps, 31.5 ka for one second, ac motor operated horizontal double break, outdoor type 3 pole isolators with all accessories,clamps, auxiliaries, marshalling boxes, other essentials, complete in all respects as specified in the technical specification with earthing blades. 118 grease of standard quality for mechanical mechanism of circuit breakers 119 female contacts for 33kv isolator 2500 amp or as per the sample. 120 dcp type fire fighting equipment of 10 kg capacity 121 dcp type fire fighting equipment of 25kg capacity 122 abc type fire fighting equipment of 5kg capacity 123 abc type fire fighting equipment of 10 kg capacity 124 2 volt, 300ah, 110volt dc vrla type cells make hbl,exide etc 125 welding electrodes swg 10no as per is: 814 of 2004 126 galvanized steel earth wire conforming to acsr core wire as per is; 398 (ii)- 1976a. stranding and wire dia : 7/3.66mmb. no. of strands steel core = 1 outer steel layer = 6 127 led lamp 12 watt ,holder type (philips, havells, crompton, bajaj make) 128 search light with 300-500mtr. focus make flash, equivalent etc 129 rubber mat 1mtr x2mtr, 12mm thick 130 100amp four pole change over switch of hpl make 131 1.1kv voltage grade 2.5sqmm 2 core copper conductor, pvc insulated control cable conforming to is: 1554-1998 132 1.1kv voltage grade 2.5sqmm 4 core copper conductor, pvc insulated control cable conforming to is: 1554-1998 133 1.1kv voltage grade 2.5sqmm 6 core copper conductor, pvc insulated control cable conforming to is: 1554-1998 134 1.1kv voltage grade 2.5sqmm 8 core copper conductor, pvc insulated control cable conforming to is: 1554-1998 135 1.1kv voltage grade 2.5sqmm 10 core copper conductor, pvc insulated control cable conforming to is: 1554-1999 136 steel wire rope sling 12mm dia isi make heavy duty as per sample and shall be of standard quality and make. 137 red oxide enamel paint (asian, nerolac/ berger) 138 aluminium paint (asian, nerolac, berger) 139 steel wire rope sling 16mm dia isi make heavy duty as per sample and shall be of standard quality and make. 140 magnetic core drill along with 16 mm core bit with following specifications:1. input supply voltage (v) = 220-240 v2. motor input = 900 watts3. core cutting capacity/ drilling diameter (mm) = 12 to 384. core cutting depth (mm) = 505. rated speed (rpm) = 4506. weight (kg) = 10.5preferred brand or make ( ralliwolf, bosch, eibenstock,bds maschinen) 142 disc insulator 70kn bands type, anti fog (bhel, rashtriya/ iec, jayashree/aditya birla make) 143 disc insulator 90kn bands type, anti fog (bhel, rashtriya/ iec, jayashree/aditya birla make) 144 disc insulator 120kn bands type, anti fog (bhel, rashtriya/ iec, jayashree make) 145 turn table for acsr panther/zebra conductor with capacity of 3mt made of mild steel with double ball bearing likely makes pee, zi, honeywell, burma etc 146 four sheave pulley steel frame forged swivel hook as per is 8610 pulley material and ball bearing of gun metal bush with open type pulley isi mark suitable for 12 mm steel rope 147 bolted type come along clamp suitable for acsr panther 37/3.15mm with al alloy clamp and groove inside for conductor gripping. hook and eye bolt of galvanized carbon steel, locking bolts made of high tensile steel is: 2121 tension limits = 2495kg likely makes pee, zi, honeywell, burma etc 148 bolted type comealong clamp for earth wire size 7/3.66mm groove according to size of earth wire bolts of high tensile steel likely makes pee, zi, honeywell, burma etc 149 snatch galvanized single sheave pulley size 6” dia pulley on ball bearing/gun metal bush with swivel hook open type with side locking suitable for use in transmission line stringing likely makes pee, zi, honeywell, burma etc 150 hook on meter likely make motwani, waco, riken etc 151 insulating hand gloves 33kv make crystal etc tested for 33kv level 152 rain coat of duck back make etc 153 gum boot of duck back make etc 154 dangari of standard make. 155 tool kit containing of all tools of standard make. 156 petroleum jelly of standard quality 157 led flood light 50 watt 158 3phase high speed industrial exhaust/cooling fan for power transformer with following specifications make : crompton greaves voltage : 415v frequency : 50hz sweep : 600mm (24inch) speed : 960 rpm 159 power transformer oil testing bottle for dga testing of oil as per the sample provided by the deptt. 160 safety helmat isi make 161 refilling of dcp fire extinguisher 162 refilling of co2 type fire extinguisher 163 shunt tripping coil / closing coil 110v dc, 1a suitable for 132kv circuit breaker of make abb, siemens, cgl or equivalent or as per the sample provided by the purchaser. 164 detachable compressor with earthwire, zebra and panther die sets each (100 ton) of standard quality and grade or as per the specifications/ sample provided by the purchaser 165 delongi/gazal/aygaz type gas heaters 166 pillar heater rotating type 1500w of standard make 167 spades (ford/tata/equivalent) 168 flexible copper wire 1.5 sqmm with insulation (havels/polycab/equivalent) 169 185 sqmm 3.5 core ac cable of havells make. 170 welding goggles 171 terminal block connectors 172 heating elements for pillar heaters ( as per sample) 173 sf6 gas filling device for abb/cgl/siemens 132 kv breakers 174 14 inch blade for iron cutter 175 flexible copper wire 2.5 sqmm with insulation (havels/polycab/equivalent) 176 flexible copper wire 4 sqmm with insulation (havels/polycab/equivalent) 177 safety belt of standard quality 178 single phase 0.5 h.p motor with suction pipe (5 mtr) and delivery pipe (10 mtr) of standard rubber (cgl/arise/havells) 179 dee-shackles of grade 63 and shall have safe working load 12.5 tonnes and shall conform with : is 6132 (part ii) (ammended upto date) or as per the sample provided by the purchaser 180 log books as per sample 181 welding cable (35sqmm copper ) of standard quality 182 dee-shackles of grade 63 and shall have safe working load 5.0 tonnes and shall conform with : is 6132 (part ii) (ammended upto date) or as per the sample provided by the purchaser 183 conductor drum lifting jack compatable for 0.2 panther /0.4 zebra /0.5 moose drums and shall be made of high strength mild steel and with hrdraulic jack mechanism or equivalent or as per the sample provided by the purchaser 184 gear mechanism for 33 kv bhel vcb of standard make or as per the sample provided by the purchaser 185 flexible copper wire 10 sqmm with insulation (havels/polycab/equivalent) 186 200 watt led flood light of standard make ( philips/ havells/crompton/bajaj) having ip rating of 65 and power efficiency of 80 and shall be compatable with already installed fixtures of high mast lights at various grid stations 187 angle holders/ baton holders ( gm/havells/bajaj/crompton) 188 grinder 750 watt-100 mm angle grinder( 100mm wheel base) (make bosch) 189 iron cutting machine power= 2200 watt and having 14 inch chop saw machine (bosch) or as per the sample provided by the purchaser 190 ratchet lever hoist having lifting capacity of 3 ton of standard make or as per the sample provided by the purchaser 191 snatch galvanized two sheave pulley size 6” dia pulley on ball bearing/gun metal bush with swivel hook open type with side locking suitable for use in transmission line stringing likely makes pee, zi, honeywell, burma etc 192 snatch galvanized three sheave pulley size 6” dia pulley on ball bearing/gun metal bush with swivel hook open type with side locking suitable for use in transmission line stringing likely makes pee, zi, honeywell, burma etc 193 electric hand drill machine with rated input power = 800 watt (make: bosch/hitachi/black and decker) or as per the sample provided by the purchaser 194 heavy duty vertical bench or stand drill with drill capacity = 39mm having 2 h.p. motor (make: ralliwolf, bosch) or equivalent or as per the sample provided by the purchaser 195 al. alloy as per is: 617 of 1975, bi-mettalic isolator pad clamp (univercial take off) conforming to is: 5561-1970 (ammended upto date) for single panther conductor with isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132kv /33kv isolator of estland, elpr, hivelm calcutta, sands, gr power, skipper, bimco, andhra mech. ind, (make: rul, zi, honeywell, burma, pee, equivalent etc/ as per sample provided by the department)

Jammu and Kashmir

Refer Doc.

06 Jul 2020

28

TSID: 17511454 auction sale of lot no: 16.0 lot name: 220kv cvt

Jammu and Kashmir

Refer Doc.

17 Jul 2020

29

TSID: 17511451 auction sale of lot no: 147.0 lot name: cross linked polythene cable

Jammu and Kashmir

Refer Doc.

17 Jul 2020

30

TSID: 17511401 providing and laying 50mm thick bitumen macadam, 25mm sdbc and 30mm thick semi dense bituminous concrete in stretches on road from panjthirthi to j.p. chowk including civil secretariat indira chowk, cpo chowk to mian deedo chowk including karan nag- civil works.

Jammu and Kashmir

1.18 Cr.

07 Jul 2020