TSID: 26962136 supplying & placing under counter drawers made of stainless steel of grade 202 of jindal/ssp make, size 1950mmx575mmx700mm.the body will be made with 40mm stainless steel square pipe of 16 gauge on border and covered with stainless steel sheet of 18 gauge with lockable drawer. the drawers shall be operated on sliding channel (godrej make) complete in all respects to the entire satisfaction of the engineer- in-charge. (detail as per dnit)
10.35 LacView Tender
06 Oct 2022
TSID: 26962134 routine servicing & maintenance of generating set with amf panel. the dg set shall have to be tested twice a month or whenever required by the qualified and experienced staff. the job includes the cost of testing, cleaning, checking of battery oil filters battery lead temp. gauge, air filter, engine oil, fuel filter, greasing of parts and other minor repair for proper working of the dg set including the cost of all the petty material required to complete the job to the entire satisfaction of engineer-in-charge. the other major components will be paid extra as required at site on actual work done basis.
5.41 LacView Tender
06 Oct 2022
TSID: 26962130 providing and fixing of split type ac of 1.5 ton, 3 star rating. the ac shall be suitable for 230 +/- 10% volts, 50 hz ac supply. the cost of including piping / electrical wire between indoor & outdoor up to two meter with sleevein type insulation i/c m.s brackets/stand for outdoor until as per madufactures standard i.e. for fixing on wall or floor/terrace as per site requirements complete in the entire statisfaction of engineer-in-charge. the ac eer not less than 3.55 supply with copper candensar. 1.5 ton capacity of nominal cooling capacity 4500 kilo calories/hr./18000 btu/hr. with permissible variation of +/- 10%. room discharge air flow 650 cfm inddor nosir level not exceed 50 db. refrigent 410 a/r32. machine should have in built gas leak detctor. the make should be carrier/ hitachi/ toshiba or its equivalent. there should be warrantee of 3 years in all respect to the entire satisfaction of engineer-in-charge.
1.07 LacView Tender
06 Oct 2022
TSID: 26962120 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) (dsr 4.1.4)
07 Oct 2022
TSID: 26962119 random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. cement mortar 1:6 (1 cement : 6 coarse sand) (dsr 7.2.1)
04 Oct 2022
TSID: 26962115 standard penetration test at the site at the interval of 1.5 m as per is 2131-1981, with rotary drilling machine including collection of various disturbed/ undisturbed soil sample at 1.5 m intervals & their complete laboratory testing as per indian standard for classification of soil & determination of various index & engg. properties of soil to base the allowable bearing capacity on shear strength as well as on settlement considerations upto 10.00 mtr depth below nsl or refusal (n>50) whichever is earlier. (n.s)
06 Oct 2022